Skip to content

CCNP R&S

CCNP R&S v7 eğitimleri ROUTE, SWITCH VE TROUBLESHOOT olmak üzere 3 ayrı kurstan oluşmaktadır. Eğitim takvimi için bu linkten bilgi alabilirsiniz. Eğitimde işlenen konu başlıkları şunlardır :

 

CCNP R&S v7 ROUTE

Chapter 1 - Basic Network and Routing Concepts

Differentiating Routing Protocols

Understanding Network Technologies

Connecting Remote Locations with Headquarters

Routing and TCP/IP Operations

Implementing RIPng

Chapter 2 - EIGRP Implementation

Establishing EIGRP Neighbor Relationships

Building the EIGRP Topology Table

Optimizing EIGRP Behavior

Configuring EIGRP for IPv6

Named EIGRP Configuration

Chapter 3 - OSPF Implementation

Basic OSPF Configuration and OSPF Adjacencies

How OSPF Builds the Routing Table

Configuration of Summarization and Stub Areas in OSPF

Configuration of OSPFv3 for IPv6 and IPv4

Chapter 4 - Manipulating Routing Updates

Using Multiple IP Routing Protocols on a Network

Implementing Route Redistribution

Controlling Routing Update Traffic

Chapter 5 - Path Control Implementation

Using Cisco Express Forwarding Switching

Understanding Path Control

Implementing Path Control Using Policy-Based Routing

Implementing Path Control Using Cisco IOS IP SLAs

Chapter 6 - Enterprise Internet Connectivity

Planning Enterprise Internet Connectivity

Establishing Single-Homed IPv4 Internet Connectivity

Establishing Single-Homed IPv6 IPv6 Internet Connectivity

Improving Internet Connectivity Resilience

Chapter 7 - BGP Implementation

BGP Terminology, Concepts, and Operation

Implementing Basic BGP

BGP Attributes and the Path-Selection Process

Controlling BGP Routing Updates

Implementing BGP for IPv6 Internet Connectivity

Chapter 8 - Routers and Routing Protocol Hardening

Securing the Management Plane on Cisco Routers

Describing Routing Protocol Authentication

Configuring Authentication for EIGRP

Configuring Authentication for OSPFv2 and OSPFv3

Configuring Authentication for BGP peers

Configuring VRF-lite



CCNP R&S v7 SWITCH

Chapter 1 - Fundamentals Review

Hubs and switches

Bridges and switches

Switches of today

Broadcast domains

MAC addresses

The basic Ethernet frame format

Basic switching function

VLANs

The Spanning Tree Protocol

Trunking

Port channels

Multilayer switching (MLS)

Chapter 2 - Network Design Fundamentals

Campus network structure

Introduction to Cisco switches and their associated architecture

Chapter 3 - Campus Network Architecture

Implementing VLANs and trunks in campus switched architecture

Understanding the concept of VTP and its limitation and configurations

Implementing and configuring EtherChannel

Chapter 4 - Spanning Tree in Depth

Data plane techniques to protect the network edge and core, including the different router interface types

Spanning Tree Protocol (STP) overview, its operations, and history

Implement Rapid Spanning Tree Protocol (RSTP)

Describe how and where to configure the following features: PortFast, UplinkFast, BackboneFast,  BPDU Guard, BPDU Filter, Root Guard, Loop Guard, Unidirectional Link Detection, and FlexLinks

Configure Multiple Spanning Tree (MST)

Troubleshooting STP

Chapter 5 - Inter-VLAN Routing

Describing inter-VLAN routing

Using an external router or a multilayer switch
 
Using either switch virtual interfaces or routed interfaces

Layer2 versus Layer 3 EtherChannel and its configuration

Implementing DHCP

Chapter 6 - First-Hop Redundancy

Overview of FHRP and HSRP

Configure and verify VRRP

Configure and verify GLBP

Chapter 7 - Network Management

AAA

Identity-based networking

802.1X

NTP, SNTP, and PTP

SNMPv3

Chapter 8 - Switching Features and Technologies for the Campus Network

Discovery protocols

Unidirectional Link Detection

Power over Ethernet

SDM templates

Monitoring features

IP SLA

Chapter 9 - High Availability

The need and basic idea behind switch stacking and VSS

StackWise

The benefits of StackWise

Verifying StackWise

VSS

VSS benefits

Verifying VSS

Supervisor redundancy

Supervisor redundancy modes

Chapter 10 - Campus Network Security

Overview of switch security issues

Required best practices for basic security protection on Catalyst switches

Campus network vulnerabilities

Port security

Storm control

Mitigating spoofing attacks

DHCP snooping, IP Source Guard, and dynamic ARP inspection

Securing VLAN trunks

Private VLANs



CCNP R&S v7 TSHOOT

Chapter 1 - Troubleshooting Methods

Troubleshooting principles

Common troubleshooting approaches

Troubleshooting example using six different approaches

Chapter 2 - Structured Troubleshooting

Meaning of structured troubleshooting method and procedure

The subprocesses of structured troubleshooting, the actions taken within each subprocess, and how and when you move from one to another progressively

Troubleshooting example utilizing the structured troubleshooting method and procedures

Chapter 3 - Network Maintenance Tasks and Best Practices

Structured network maintenance

Network maintenance processes and procedures

Network maintenance services and tools

Integrating troubleshooting into the network maintenance process

Chapter 4 - Basic Switching and Routing Process and Effective IOS Troubleshooting Commands

Basic Layer 2 switching process

Basic Layer 3 routing process

Selective information gathering using IOS show commands, debug commands, ping and Telnet

Chapter 5 - Using Specialized Maintenance and Troubleshooting Tools

Categories of troubleshooting tools

Traffic-capturing features and tools

Information gathering with SNMP

Information gathering with NetFlow

Network event notification with EEM

Chapter 6 - Troubleshooting Case Study 1

Chapter 7 - Troubleshooting Case Study 2

Chapter 8 - Troubleshooting Case Study 3

Chapter 9 - Troubleshooting Case Study 4

Chapter 10 - Troubleshooting Case Study 5